| Round duct system
Round Pressed Bend 90° (with Gasket)
Product Description
A round 90° pressed bend (or elbow) is a high-quality fitting designed to change the direction of a ventilation run at a right angle. Unlike standard segmented bends, this part is manufactured using a pressing (stamping) method.
Thanks to its pressed (seamless) construction, the bend has a smooth inner surface, which ensures minimal airflow resistance. The presence of a factory-installed EPDM rubber gasket guarantees a high airtightness (Class "D"), which is important for energy-efficient systems.
Key Features
- Airtightness Class D: Thanks to the EPDM gasket, which is factory-crimped by a lock-seam, a high level of system airtightness is achieved without the need for sealants.
- Pressed (Seamless) Construction: Unlike segmented bends, the smooth inner surface provides minimal airflow resistance, reduces noise levels, and prevents dust accumulation.
- Safe Edges "SAFE": Specially rounded and reinforced edges make installation safer (no sharp edges to cut hands) and provide additional rigidity.
- High-Quality Steel: Made from high-quality galvanized steel (Z275, 275 g/m²).
Available Diameters and Specifications
Below are the standard sizes for pressed bends. Segmented bends (diameter 250 mm and larger) are a separate product.
Main parameters of 90° pressed bends
| Diameter (mm) |
Radius (A, mm) |
Insertion Depth (H, mm) |
Weight (kg) |
Article |
| 80 |
100 |
35 |
0.27 |
VASLI90080P |
| 100 |
100 |
35 |
0.35 |
VASLI90100P |
| 125 |
125 |
35 |
0.52 |
VASLI90125P |
| 160 |
160 |
35 |
0.83 |
VASLI90160P |
| 200 |
200 |
35 |
1.27 |
VASLI90200P |
Material and Thickness (for all types):
- Material: Galvanized steel DX51+Z275 (275 g/m²). Stainless steel (AISI430, AISI304, AISI316), aluminum, and powder coating (according to RAL or RR catalogs) are available on request.
- Thickness: ~ 0.5 mm (standard for pressed items).
- Certification: The products comply with CE, EN 1505:2000 and EN 1506:2007 standards.
Application and Installation Tips
- Installation: The bend (which has a "male" spigot with a gasket) inserts easily and airtightly inside a straight duct.
- "Fitting-to-fitting" connection: To connect two fittings (e.g., two bends) together, use a coupler (external connection).
- Safety: Thanks to the "SAFE" edges, installation is faster and safer, without the risk of cuts.
- Fastening: It is recommended to secure the joint using self-tapping screws or rivets.
Availability and Ordering
- Availability: Standard pressed bends, shown in the table, are always in stock.
- Custom Order: On request, it is possible to manufacture bends without a gasket (to reduce cost) and any other non-standard variations (including the materials specified in the characteristics).
|
|
