Product Description

This SPNP straight pipe section, with a length of 500 mm, is made of 1.2 mm black carbon steel (DC01) and is designed for connecting pellet stoves, pellet boilers, and other pellet-fired heating appliances to the main chimney system. It is installed indoors and serves as a connecting flue pipe, providing a pressure-tight (Class P1) connection to an existing brick, ceramic, or twin-wall insulated stainless steel chimney.

Key Features

• Pressure-Tight Seal for Modern Heating Systems (Class P1): Our flue system is designed specifically for fan-assisted and forced draught boilers. The socket connection with a pre-installed silicone gasket is essential for these power-vented appliances, where flue gases are expelled under positive pressure.
• Precise Fit & Quick Installation: The socket-and-spigot system allows for rapid assembly without the need for cutting or cements. This significantly reduces installation time on-site.
• Durable Senotherm Coating: The pipe is coated with a black matte heat-resistant paint that withstands operating temperatures up to 200°C. The coating protects against corrosion and matches the finish of most European boilers.
• European Quality and Safety: The product is certified and CE marked, confirming its full compliance with the European standard for flue systems EN 1856-2. This is your guarantee of safety and compatibility with modern pellet boilers.

Technical Specifications

Important Limitations

• For Pellet Boilers Only: Do not use with wood-burning stoves, open fireplaces, or other solid fuel boilers where flue gas temperatures exceed 200°C and there is a risk of soot fire.
• For Indoor Installation Only: This is not an insulated (twin-wall) pipe and is intended for installation only inside heated spaces.