| Stainless Steel Chimneys - IZOKOMPAKT
Square Wall & Ceiling Plate for Chimneys (Finishing Plate)
Product Description
The square decorative plate (also known as a rosette or ceiling plate) is a component of the IZOKOMPAKT three-layer chimney system, designed for the aesthetic finishing of the penetration point where a pipe passes through a wall or ceiling. It conceals the installation gap and the components of the firestop enclosure, creating a neat and finished look for the pass-through assembly.
Key Features
- Aesthetic and Finished Look: The main function of the plate is to hide the construction opening in a wall or ceiling, providing a clean and harmonious junction for the twin-wall chimney to the surface.
- Simple Two-Part Installation: The design consists of two halves that easily connect. This allows the plate to be installed after the chimney is already fully assembled, which significantly simplifies the finishing work.
- Variety of Options: In addition to the standard flat version, special models are available for sloped ceilings (mansards), as well as ventilated plates to improve cooling within the pass-through assembly.
- Full System Compatibility: It is made from the same materials and in the same colours as the outer casing of the insulated chimney, ensuring a perfect visual match.
How to Choose the Correct Plate Type?
Depending on the installation location and ceiling type, you can choose one of the following options:
- Standard Flat Plate:
Used for finishing penetrations through vertical walls or horizontal ceilings (at a 90° angle).
- Plate for Sloped Ceilings:
For mansard and other sloped ceilings, we offer universal plates with an adjustable angle (0-30° and 30-45°) or we can custom-make a component with an oval cutout to your exact angle.
- Ventilated Plate:
When passing a chimney through combustible floors (wood), it is recommended to use a plate with perforations. It ensures air circulation within the firestop box, contributing to its cooling.
Specifications for the Standard Plate
Sizes and Articles for the standard flat plate
For Chimney (Outer Ø, mm) |
Outer Plate Size, mm |
Article |
200 |
500 x 500 |
DN1SIK10 |
220 |
500 x 500 |
DN1SIK12 |
225 |
530 x 530 |
DN1SIK13 |
250 |
550 x 550 |
DN1SIK16 |
280 |
580 x 580 |
DN1SIK18 |
300 |
600 x 600 |
DN1SIK20 |
* Plates of other types and sizes (including angled and ventilated) are available on request. Please contact our specialists.
Important Installation Notes
- Not a Load-Bearing Component: The decorative plate is not designed to support the weight of the chimney. The chimney must be securely fastened using wall brackets or support platforms.
- Fire Safety Requirements: The plate is only a finishing trim. The penetration itself through a wall or ceiling made of combustible materials must be constructed using a special firestop enclosure and non-combustible insulation materials in accordance with building codes.
|
|