Product Description

The Adjustable Wall Bracket is a primary load-bearing component for IZOKOMPAKT three-layer chimneys, designed for securely fastening the vertical chimney stack to the building's wall. As a versatile wall support, its telescopic design with threaded rods allows you to adjust the distance from the wall, which is necessary to compensate for uneven facades and to ensure precise vertical positioning of the twin-wall chimney.

Key Features

• Adjustable Wall Clearance: Allows for perfect vertical alignment of the chimney, even when installed on uneven walls or complex facades. A wide range of adjustment from 50 mm to 650 mm is available.
• High Load-Bearing Capacity: The bracket is a durable welded structure capable of withstanding not only the weight of the insulated chimney but also significant wind and snow loads.
• Can Act as a Support: With a wall clearance of up to 500 mm, this bracket can also serve as the main support for the chimney, eliminating the need to install a separate mounting platform at its base.
• Durable Materials and Coating: It is made from high-strength steel (S235 or stainless steel 304) and is protected from corrosion by galvanization or powder coating, ensuring a long service life in all weather conditions.

Available Adjustment Ranges

Choose the bracket model that corresponds to the required distance from the wall to the chimney:

• Clearance 50 – 150 mm
• Clearance 150 – 250 mm
• Clearance 250 – 350 mm
• Clearance 350 – 450 mm
• Clearance 450 – 550 mm
• Clearance 550 – 650 mm

Articles & Available Diameters

The table below provides the articles for each diameter depending on the selected adjustment range.

Application & IMPORTANT INSTALLATION RULES

• Installation Spacing: It is recommended to install wall brackets every 2 meters of the insulated chimney's height.
• Reducing the Spacing: For larger chimney diameters or greater wall clearances, the installation spacing should be reduced (e.g., to 1.5 meters) to ensure greater structural rigidity.
• Additional Support: If the distance from the wall to the chimney exceeds 500 mm, an additional support—a mounting start platform—must be installed at the base of the chimney.
• Alternative Solution: For fastening a chimney at a fixed distance from the wall, a fixed wall bracket is used.