| Stainless Steel Chimneys - IZOKOMPAKT
Base Support Bracket for Insulated Chimney (Load-Bearing)
Product Description
The Base Support Bracket is a primary load-bearing component that serves as the foundation for mounting a vertical stack of a chimney to the wall of a building. Its main purpose is to take on the full vertical weight of the entire chimney system and securely transfer it to a load-bearing wall. It is the ideal solution when the chimney does not start from the floor, but at a certain height from the ground.
Key Features
- High Load-Bearing Capacity: The reinforced, welded T-shaped structure made from profile tube is certified (EN-1090-2) and capable of supporting the weight of dozens of meters of twin-wall chimney, as well as wind and snow loads.
- Various Wall Clearances: Models are produced with different shelf lengths (up to 350, 450, and 550 mm), which allows for selecting the optimal distance from the wall to bypass roof eaves or other architectural elements.
- Base for a Mounting Platform: For the most correct and serviceable installation, a mounting start platform is installed on this bracket, and the first chimney component (e.g., a condensate collector) is placed on top of it.
- Reliable Materials and Coating: It is made from high-strength structural steel S235 with a powder coating or from stainless steel, ensuring a long service life.
Available Options & Ordering
Choose the bracket model corresponding to the required distance from the wall. You can purchase the required version in our e-shop:
Summary table of articles for the Base Support Bracket
For Chimney (Outer Ø) |
Article (Clearance up to 350 mm) |
Article (Clearance up to 450 mm) |
Article (Clearance up to 550 mm) |
225 mm |
DN1DMM3513 |
DN1DMM4513 |
DN1DMM5513 |
250 mm |
DN1DMM3516 |
DN1DMM4516 |
DN1DMM5516 |
280 mm |
DN1DMM3518 |
DN1DMM4518 |
DN1DMM5518 |
300 mm |
DN1DMM3520 |
DN1DMM4520 |
DN1DMM5520 |
Application & IMPORTANT INSTALLATION RULES
- FASTEN TO A LOAD-BEARING WALL: The support bracket must only be fastened to a strong, load-bearing wall using anchor bolts or other fasteners capable of supporting the full weight of the insulated chimney.
- Recommended Installation Scheme: For ease of system maintenance (to allow for removal of the condensate collector), it is highly recommended to use this bracket in conjunction with a mounting start platform.
- Alternative Solution: For fastening a chimney with a clearance of up to 500 mm, an adjustable wall bracket can also be used as a load-bearing support.
|
|