Profiled Metal Roof Ridge Cap (Large Profile)

The profiled roof ridge cap is a complex geometric flashing element designed to protect the upper intersection of roof slopes and hips from precipitation. The U-shaped central section of the profile ensures unobstructed air exhaust from the ventilation gap, promoting proper air circulation in the under-roof space.

This modification features increased cross-sectional dimensions. The wide profile is applied on large-scale buildings and roofs with a large slope area. It provides an increased overlap on the roofing material, which guarantees maximum protection against wind-driven rain and snow infiltration even under severe wind loads.

Design Features:

• Expanded Geometry: The increased dimensions of the base flanges (A, B, C) reliably cover wider ventilation gaps and work perfectly with large-format roofing materials.
• Ventilation Channel: The profiled protrusion in the center of the part provides additional longitudinal rigidity, preventing deformation of the wide element, and forms a channel for air exhaust.
• Safe Edges: The lower edges of the sloped flanges are equipped with standard 10 mm hems (drip edges), which protect the metal from deformation and reduce the risk of injury during installation.
• Material Variety: Products are manufactured from galvanized steel, stainless steel, and sheet metal with protective polymer coatings (Polyester, PURal, PVC).
• Quality Control: The bending production cycle is certified and strictly complies with European standards (Factory Production Control Certificate No. 1805/2011).

Technical Specifications:

• Manufacturer: SIA Akvilon
• Available Materials: Galvanized steel (Zn), Stainless steel, Polymer-coated steel (PE, PURal, PVC)
• Maximum length of a continuous piece: Up to 3000 mm (3 m)
• Profile size (A x B x C): Large (wide cross-section / custom fabricated to customer dimensions)
• Hem / Drip edge width: 10 mm

Materials and Available Length: