Simple Metal Roof Ridge Cap (Large Profile)

The simple roof ridge cap is a classic V-shaped flashing element designed to protect the upper intersection of roof slopes and hips from precipitation. The product reliably covers the ventilation gap, preventing moisture from entering the under-roof space.

This modification features increased cross-sectional dimensions. The enlarged profile (wide flanges) is applied on roofs with a large slope area and long ridge lines. The greater flange width provides a significant overlap on the roofing material, which guarantees reliable protection against wind-driven rain and snow infiltration even under extreme wind loads.

Design Features:

• Scalable Geometry: The increased dimensions of the base flanges (A, B) and the bending angle are calculated individually for the pitch and area of a specific roof to ensure maximum watertightness of the joint.
• Classic V-shaped Profile: The sleek design without additional stiffening ribs provides a neat appearance and simplifies the installation process on large-scale facilities.
• Safe Edges: The lower edges of the sloped flanges are equipped with standard 10 mm hems (drip edges), which provide the wide element with additional longitudinal rigidity and prevent edge deformation.
• Material Variety: Products are manufactured from galvanized steel, stainless steel, and sheet metal with protective polymer coatings (Polyester, PURal, PVC).
• Quality Control: The bending production cycle complies with European standards (Factory Production Control Certificate No. 1805/2011).

Technical Specifications:

• Manufacturer: SIA Akvilon
• Available Materials: Galvanized steel (Zn), Stainless steel, Polymer-coated steel (PE, PURal, PVC)
• Maximum length of a continuous piece: Up to 3000 mm (3 m)
• Profile size (A x B) and bending angle: Large (wide cross-section / custom fabricated to specific roof pitch)
• Hem / Drip edge width: 10 mm

Materials and Available Length: